Figure 10-51：Ibm Bluemix Reset Variable Action Setting Page - ICP DAS USA WISE-2841M Series User Manual

ICP DAS WISE User Manual
Follow the steps below:
i
ii Click "OK" button to confirm the settings and return to the
10.2.6.3
You can reset the saved content of the subscribe variable from IBM
Bluemix when executing a THEN/ELSE Action statement; the editing
page is shown as below:
Follow the steps below:
i Select a Command and a Variable from the dropdown list of the
ii Click "OK" button to confirm the settings and return to the Rule
10.2.7 MQTT
Click on "MQTT", 3 options will appear as the following: "Broker
Function", "Publish Message" and "Reset Topic".
10.2.7.1
User can execute an action to change the function status of MQTT
Broker in the THEN/ELSE Action statement; the editing page is
http://wise.icpdas.com
Select a pre-set Publish message from the dropdown list of the
"Message" field. The Publish message will be displayed for
you to verify if this is the message you are going to send to.
Rule settings page.
Reset Variable
Figure 10-51：IBM Bluemix Reset Variable action setting page
"Name" field. When this action is executed, WISE would reset
the content of the variable, and the evaluation result of the IF
statement which is associated with the variable will be verified
again.
settings page.
Broker Function
237