Figure 9-35：Line Notify Forward Setting Page(1) - ICP DAS USA WISE-2841M Series User Manual

ICP DAS WISE User Manual
After complete all settings, click the "OK" button to confirm the
vi
LINE Notify message setting, and return to the Message Setting
page.
vii Repeat steps ii~vi to complete settings of all LINE Notify
messages.
viii After you finish all the LINE Notify Message settings, click
"Save" button to save the settings.
9.7.2 Forward Setting
WISE supports the message forward function to send the image files
with LINE Notify service. It can send messages with image in JPG or
PNG format. The source of the image files includes following type:

Upload files to the specific path (/Sendbox/LINE) of the FTP
server on the WISE, and then WISE would forward messages
with the files automatically.

Connect to iCAM series IP cameras. WISE can collect the
snapshots captured by iCAM cameras.

Connect to CGI servers and get the images with CGI commands.
(For example, users can use WISE controllers to connect with
general IP cameras, and get snapshots with CGI commands.)
The Forward Setting page is as below:
Users can upload image files to the FTP server of the WISE controller
(the path is /Sendbox/LINE), and WISE would send LINE messages
http://wise.icpdas.com
Figure 9-35：LINE Notify Forward Setting page(1)
179