Figure 9-4：Timer List Page; Figure 9-5：Timer Setting Page (By Assign Value); Figure 9-6：Timer Setting Page (By Internal Register) - ICP DAS USA WISE-2841M Series User Manual

ICP DAS WISE User Manual
v Repeat steps i~iv to complete settings of all Timers.
vi To modify the settings of a pre-set timer, please click on the radio
button in front of the timer, and then click on "Setting" to modify the
settings. The setting user interface is as following:
vii User can modify the setting of "Nickname", "Initial Status" and
"Period" in the Timer Setting page, and input the description of this
Timer in the "Description" field.
viii Click on "OK" to confirm the setting and return to the Timer list page.
ix After return to Timer list page, if user want to copy the settings of a
pre-set Timer to the new Timer, please click the radio button in front of
the pre-set Timer and then click "Copy", a new Timer (in sequence)
http://wise.icpdas.com
Figure 9-4：Timer List Page
Figure 9-5：Timer Setting page (by assign value)
Figure 9-6：Timer Setting page (by Internal Register)
157