Table of Contents
Advertisement
ICP DAS WISE User Manual
The settings are as below:
Nickname: For user to define nickname for the module and the I/O
channels, these nicknames will be displayed on the "Channel
Status" and "Rule Setting" pages.
For I-7000/DL DCON DO channels, WISE provides the "Auto
OFF" and "DI Status Mapping" advanced functions, select the
function from the dropdown list:
After all settings of the DO channels are completed, continue the
configuration of other channels, and after all channel settings are
completed, click "OK" button to save the changes and return to
http://wise.icpdas.com
Figure 6-18：I-7000/DL Module DO Channel Setting page
Auto OFF: When "Auto OFF" is selected, it allows this DO
channel to enable Auto OFF function. It is required to set up a
time interval, when this DO channel is set to be "ON" and the
duration of the ON status reaches the pre-set time interval, the
DO channel will automatically be set to OFF. The unit is
second.
DI Status Mapping: When "DI Status Mapping" is selected,
the status of the DI channel with the same channel number on
the I-7000/DL DCON module will be copied to the DO
channel. For example, when the "DI Status Mapping" is
enabled on DO0, when the DI0 status is ON, DO0 will set to
be ON, and when the DI0 status is OFF, DO0 will set to be
OFF as well.
68
Advertisement
Table of Contents
