Cgi Command Setting - ICP DAS USA WISE-2841M Series User Manual

ICP DAS WISE User Manual
page.
x Repeat steps i~ix to complete the setting of each SNMP Trap.
xi After complete all SNMP Trap settings, please click "OK" button to
save the setting for all SNMP Trap.

9.6 CGI Command Setting

CGI command function is the important function for real-time message
communication. WISE supports fully CGI command operations as CGI
command sending and CGI command receiving. The CGI command
sending function can be added to the logic edition as part of logic control in
response to specific events. The CGI command receiving function let WISE
can receive CGI commands from others network devices. The content of
CGI command receiving can be used in IF condition statements to trigger
the THEN/ELSE actions.
After the user completing the settings of a CGI Server, WISE will
automatically create a mapping folder under the CGI directory in the
microSD card. The new folder will use the nickname of the CGI Server as
the folder name, however, if the CGI Server's nickname is not in English
format or numbers; the new folder will use the IP address of the CGI Server
as the folder name. After the CGI command receiving function is enabled
and requires the response of CGI Server to be saved; the response from the
CGI Server will be saved as files in its mapping CGI Server folder. The
files inside the folder will be classified automatically by date. User can also
enable the file transfer operation, then the WISE will send back all files
inside the folder to the remote FTP Server. The configuration page for CGI
command sending and CGI command receiving setting is shown as below.
9.6.1 The setting of CGI command sending
WISE supports the CGI command sending function. This function
allows sending pre-input CGI Commands to pre-set Remote CGI
Server devices under certain conditions. The configuration page is
shown as below:
http://wise.icpdas.com
170