Figure 10-41：Ip Camera's Event Action Setting Page; Figure 10-42：Ip Camera's Osd Message Action Setting Page - ICP DAS USA WISE-2841M Series User Manual

ICP DAS WISE User Manual
Follow the steps below:
i
ii If the IP Camera supports OSD message function and user has
iii Click "OK" button to confirm the settings and return to the
10.2.3.3
User can trigger the IP Camera to enable the OSD message display
operation in the THEN/ELSE Action statement; the editing page for
OSD Message Action is shown as follow:
Follow the steps below:
i
http://wise.icpdas.com
Figure 10-41：IP Camera's Event action setting page
Specify the IP Camera from the dropdown list of the "IP
Camera & Video" section. If the WISE's action is executed, the
WISE will trigger the IP Camera to record a video and save it.
Some IP Cameras can set the length of time for video
recording (10~60 seconds).
automatically uploaded to WISE after the video recording is
finished.
completed the setting, then a pre-set OSD message could be
selected from the dropdown list of the "OSD message" field.
The video which the IP Camera records will bind the OSD
message.
Rule settings page.
OSD Message
Figure 10-42：IP Camera's OSD Message action setting page
Specify the IP Camera and OSD message from the dropdown
The video file will be
232