Table of Contents
Advertisement
ICP DAS WISE User Manual
Active I/O Sending function
In addition to the Modbus TCP/RTU Slave function that enables SCADA
software (or HMI device) to poll the I/O channels value of the WISE controller,
now WISE-2841M provide the function "Active I/O Sending" for users. Based
on the "Active I/O Sending" function, WISE-2841M can send the I/O channels
value of the controller actively to SCADA software (or HMI device) by event
trigger (I/O channel value changed) or periodic cycle. This function will improve
the efficient of the data communication between WISE-2841M and SCADA
software (and HMI device).
must equip the Modbus TCP Slave function to receive the I/O channels data sent
by WISE-2841M.
MQTT Message Publish/Subscribe operation
WISE-2841M supports the MQTT protocol. It can publish the I/O data of the I/O
module which connect to WISE-2841M to the MQTT broker, and receive the
message content of the
MQTT device for the data logging operation or using it in the IF-THEN-ELSE
logic rule.
Connection with IoT Cloud Platform
WISE-2841M support the connection ability with the IoT Cloud Platform as
Amazon Web Services, Microsoft Azure, IBM Bluemix, etc. It work as the
concentrator in the IoT application to connect with Sensors and I/O modules,
collect and transfer the I/O channel data to the Cloud platform for future data
analysis. WISE-2841M also can receive the message which is published from the
Cloud platform for the corresponding actions at the field side.
Connect with IoTstar Cloud Management Software
WISE-2841M supports the connection with IoTstar Cloud Management software
developed by ICP DAS. Through the function of IoTstar, the sensor data and
image files uploaded from WISE-2841M can be automatically imported and
integrated, and the remote monitoring dashboard can be easily created to perform
the remote monitoring and maintenance operation.
Provide LINE Notify message sending function
WISE-2841M supports to send LINE messages to the LINE personal account or
group chat room. The LINE message sending function can be triggered by
IF-THEN-ELSE rules. The LINE message content could be a preset string with
http://wise.icpdas.com
Please note: The SCADA software (or HMI device)
Subscribe MQTT Topics
which is published by others
20
Advertisement
Table of Contents
