Table of Contents
Advertisement
ICP DAS WISE User Manual
keep going periodically. There are five options: "Disable", "Once an
hour", "Once a day", "Once a week" and "Once a month".
ii If user selects "Once a day", "Once a week" or "Once a month", please
select the "Upload Timing" for the Event Logger.
iii In the "FTP Server" field, please specify the FTP Servers which will
receive the Event Logger files WISE send. WISE can send the Event
Logger files to multi-FTP Servers simultaneously. User can directly
click on the rectangle area at the right side of "FTP Server" field to
configure the FTP Server. Please refer to
section for detail. If you select "Do not upload to any FTP Server",
WISE will not send the Event Logger file to any FTP Server.
After all settings are completed, click "Save" button to save the setting.
iv
7.5 FTP Server Setting
I/O Module Data Logger files, User-Defined Data logger files and Event
logger files all can be upload to remote FTP server of the manage center via
FTP protocol. The FTP Server Setting page allows to set up parameters for
FTP Upload, the setting page is shown as below:
Follow the steps below:
Click on "Add new FTP Server" to add a new FTP Server.
i
After clicking the "Add new FTP Server", a setting page of FTP Server
ii
will appear.
http://wise.icpdas.com
Figure 7-11：FTP Server List page
"7.5 FTP Server
Setting"
113
Advertisement
Table of Contents
