ICP DAS WISE User Manual
iv Click "OK" button to confirm the settings and return to the Rule
10.1.1.3
DO channel value from ICP DAS I/O Module can be used as
evaluation criteria for IF condition statement; the setting page for DO
Condition Setting is shown as below:
Follow the steps below:
i Specify the module and the channel from the dropdown list of
http://wise.icpdas.com
Azure: The value of the Azure received parameter could
be used as evaluation criteria; select the variable name
from the dropdown list to specify which variable will be
used.
Bluemix: The value of the Bluemix received parameter
could be used as evaluation criteria; select the command
and the variable name from the dropdown list to specify
which variable will be used.
Please Note: The content of received MQTT subscribe
topic or AWS / Azure / Bluemix parameter must be a
number, otherwise 0 will be assigned.
settings page.
DO
Figure 10-5:DO condition setting page
the "Module & Channel" section that you are going to include
202