Download
Share
Print this page
ICP DAS USA WISE-52 Series Quick Start Manual
  1. Manuals
  2. Brands
  3. ICP DAS USA Manuals
  4. Controller
  5. WISE-52 Series
  6. Quick start manual

ICP DAS USA WISE-52 Series Quick Start Manual

Hide thumbs
1
2
3
4
5
6
7
8

Advertisement

Quick Links

Download this manual
Thank you for purchasing WISE-52xx – the Web-based Intelligent IOT controller for
remote monitoring and control application.
minimum information to get started with WISE-52xx. It is intended for use only
as a quick reference. For more detailed information and procedures, please
refer to the full user manual on the CD included in this package.
In addition to this document, the package includes the following items:
WISE-52xx
Series Module
● WISE-52xx User Manual
CD:\WISE-52xx\document\user manual
http://wise.icpdas.com/Download.html
● WISE-52xx Website
http://wise.icpdas.com
Copyright © 2015 ICP DAS Co., Ltd. All Rights Reserved.
Quick Start for WISE-52xx Series
Software
microSD card
Utility CD
January 2016, Version 1.0.1
This Quick Start will provide you with
Screw Driver
(1C016)
E-mail: service@icpdas.com
1

Advertisement

loading

Related Manuals for ICP DAS USA WISE-52 Series

Summary of Contents for ICP DAS USA WISE-52 Series

  • Page 1 Quick Start for WISE-52xx Series January 2016, Version 1.0.1 Thank you for purchasing WISE-52xx – the Web-based Intelligent IOT controller for This Quick Start will provide you with remote monitoring and control application. minimum information to get started with WISE-52xx. It is intended for use only as a quick reference.
  • Page 2 -------------------------------------------------------------------------------- Configuring the boot mode Before starting WISE-52xx at the first time, be sure that the switch is placed in the “0” position. -------------------------------------------------------------------------------- Connect to PC, Network and Power The WISE-52xx is equipped with an RJ-45 Ethernet port for connection to an Ethernet hub/switch and PC.
  • Page 3 -------------------------------------------------------------------------------- Using Browser to Assign a New IP The WISE-52xx is an Ethernet controller, which comes with a default IP setting; therefore, you must first assign a new IP setting to the LAN1 port of WISE-52xx. The factory default IP settings of WISE-52xx are as follows: Item Default IP Address...
  • Page 4 -------------------------------------------------------------------------------- Go to WISE-52xx Web Site to edit Control Logic Please follow the steps below to implement IF-THEN-ELSE control logic on ICP DAS WISE-52xx controllers: Step 1: Open a browser, and type in the URL address of the WISE-52xx Open a browser and type in the URL address(The new IP setting) of the WISE-52xx in the address bar.
  • Page 5 WISE-52xx 系列快速安裝指南 January 2016, Version 1.0.1 歡迎使用 WISE-52xx 快速安裝指南 感謝您購買 WISE-52xx Web-based智慧型物聯網I/O控制器。本『快速安裝 指南』提供 WISE-52xx安裝入門所需資訊，如需更詳細的安裝及使用說明， 請參閱WISE-52xx使用手冊。 產品內容 除了本『快速安裝指南』外，此產品內容還包括以下配件： 軟體工具 螺絲起子 WISE-52xx microSD 卡 模組 光碟 (1C016) 技術支援 ● WISE-52xx 使用手冊  CD:\WISE-52xx\document\user manual http://wise.icpdas.com/Download.html  ● WISE-52xx 產品網頁 http://wise.icpdas.com Copyright © 2015 ICP DAS Co., Ltd. All Rights Reserved. E-mail: service@icpdas.com...
  • Page 6 --------------------------------------------------------- 檢視啟動模式 在第一次啟動 WISE-52xx 前，請先確認 旋轉式開關的位置在“0”。 -------------------------------------------------------- 連接 PC 主機、網路及電源 WISE-52xx 配有標準的網路接口 RJ-45，可透過網路集線器/交換器與 PC 連接，也可直接連到 PC 的網路接口。 WISE-52xx Copyright © 2015 ICP DAS Co., Ltd. All Rights Reserved. E-mail: service@icpdas.com...
  • Page 7 -------------------------------------------------------- 啟動瀏覽器設定 WISE-52xx 的 IP 位址 WISE-52xx 在出廠時會統一預設網路設定值，使用者可以依照下列步驟自行變更 網路設定。WISE-52xx 的網路出廠預設值： 項目 預設值 IP 位址 192.168.255.1 子網路遮罩(subnet mask) 255.255.0.0 通訊閘(gateway) 192.168.0.1 DNS Server 8.8.8.8(預設為 Google DNS Server) 設定步驟 步驟1： 將 PC 的網路設定更改為與 WISE-52xx 相同網路區段。例如：  IP：192.168.255.10  Subnet mask：255.255.0.0  Gateway address：192.168.0.1 步驟2：...
  • Page 8 ------------------------------------------------------- 前往 WISE-52xx 網頁進行邏輯規則設定 使用者透過 WISE-52xx 所提供的網頁，只需使用滑鼠點選設定，即可完成控制器 上的 I/O 模組連接與工作邏輯的規劃。 步驟一：開啟瀏覽器，填入 WISE-52xx IP 作為瀏覽器的 URL 位址 開啟電腦上的瀏覽器，輸入 WISE-52xx 的 IP 作為 URL 位址(如有重新設定 IP， 請確認所輸入 IP 是否正確)。 步驟二：進入 WISE-52xx 的設定頁面 進入 WISE-52xx 所提供的參數設定頁面，使用預設密碼”Admin”登入後，僅需依 照首頁上的設定流程： 【模組設定】【進階功能設定】【邏輯規則設定】【寫 入設定】 ，即可完成 WISE 控制器的邏輯規則編排。 步驟三：設定流程中的細節，請參照 WISE-52xx 操作手冊 Copyright ©...