Table of Contents
Advertisement
ICP DAS WISE User Manual
(b.) In the "Time Range(s)" section, click "Add" to add new Time
(c.) On the calendars, click to toggle highlight on the dates you‟d
http://wise.icpdas.com
Figure 9-8：Calendar mode of Schedule setting
Range of this schedule. Select the start time and the end time
from the dropdown list. User can also enable the "Hourly"
option for the "Time Range" seting to launch the schedule with
the set date. Each Schedule is required to set at least one Time
Range; click on "Add" to add more Time Range.
the time zones you specified can‟t be overlapped.
an end time that is earlier than the start time, such as 20:00:00 ~
06:00:00, it indicates the end time will be set one day after the
start date. Click "Remove" to remove a pre-set Time Range.
like to execute or not execute the operations for this Schedule.
If the date shows a light purple background, it indicates the date
is "In Range" of the schedule, that is, that date falls into the
range that will execute the operations. On the contrary, if the
date shows a light grey background, it indicates that date is
"Out of Range" of the schedule, that is, that date falls out of the
range and will not execute the operations.
will be "In Range", that is, during the date range you select, the
operation will be executed every day.
used to set all dates to be "In Range"; whereas
button is for marking all dates to be "Out of Range". The
"Select Weekday"
button is for you to select all Mondays to
Please note:
If you specify
By default, all dates
"Select All"
button is
"Unselect All"
159
Advertisement
Table of Contents
