Figure 10-28：Timer Condition Setting Page - ICP DAS USA WISE-2841M Series User Manual

ICP DAS WISE User Manual
Follow the steps below:
i Specify the module from the dropdown list of the "Module" section
that you are going to include its Connection Status in the IF condition
statements.
ii And then specify the Connection Status to be "Offline" or "Online".
If the Connection Status of the module match the evaluation criteria,
the result of this condition evaluation will be "true".
iii Click "OK" button to confirm the settings and return to the Rule
settings page.
10.1.10 Timer
Timer condition can be used as evaluation criteria for IF condition
statement; the editing page for timer condition setting is shown as follow:
Follow the following steps:
i Select the timer that you are going to use its status as evaluation
criteria for IF condition statement. Specify the timer from the
dropdown list of the "Timer" field.
ii Define the evaluation criteria of the timer status in IF statement to be
"Not timeout", "Timeout" or "Stop". If the timer status match the
evaluation criteria, the result of this condition evaluation will be
"true".
iii Click "OK" button to save the settings. The popup window will be
closed and return to the Rule settings page.
10.1.11 Schedule
The Schedule can be used as evaluation criteria for IF condition statement;
the editing page for Schedule Condition Setting is shown as follow:
http://wise.icpdas.com
Figure 10-28：Timer condition setting page
218