Table of Contents
Advertisement
ICP DAS WISE User Manual
iii
In the Broker parameters setting page, you can input the name of
the Broker in the "Nickname" field and you could also input the
description of this Broker in the "Description" field.
Check "Enable" or "Disable" in the "Initial Status" field to enable
iv
the initial connection status with the Broker. If the user clicks
"Enable", it means the WISE will start the communication with the
Broker after it is powered on.
Enter the Broker IP address (or domain name) in the "Address"
v
field.
Enter the Broker Port number in the "Port" field.
vi
vii If the Broker requires account and password validation, please
select the "Enable" checkbox in the "Authentication" field, and
enter the login ID and password in the "ID" and "Password" fields
to login into the Broker. If the Broker doesn‟t need account and
password validation, uncheck the "Enable" checkbox and go
directly to next step.
viii Enter the Client ID information in the "Client ID" field. The Client
ID is used for Broker to verify if the MQTT Client is allowed to
http://wise.icpdas.com
Figure 8-19：MQTT Broker Parameter setting page
137
Advertisement
Table of Contents
