Figure 6-20：I-7000/Dl Module Ao Channel Setting Page - ICP DAS USA WISE-2841M Series User Manual

ICP DAS WISE User Manual
already-adjusted value in the evaluation operation, and the AI
value retrieved from the "Channel Status" page or Modbus Table
via WISE would be the adjusted value. The default value for
Maximum and Minimum is 0, it means the Scale function is
disabled.
After all settings of the AI channels are completed, continue the
configuration of other channels, and after all channel settings are
completed, click "OK" button to save the changes and return to
I-7000/DL DCON Module List.
6.3.4 The AO channel setting for I-7000/DL DCON module
The I-7000/DL DCON module AO channel setting interface is shown
as below (using I-7024 as an example):
The settings are as below:
 Nickname: For user to define nickname for the module and the I/O
channels, these nicknames will be displayed on the "Channel
Status" and "Rule Setting" pages.
 Type: Select the output signal type of the AO channel from the
dropdown list.
After all settings of the AO channels are completed, continue the
configuration of other channels, and after all channel settings are
completed, click "OK" button to save the changes and return to
I-7000/DL DCON Module List.
http://wise.icpdas.com
Figure 6-20：I-7000/DL Module AO Channel Setting page
70