Figure 10-40：Ip Camera's Snapshot Action Setting Page - ICP DAS USA WISE-2841M Series User Manual

ICP DAS WISE User Manual
10.2.3.1
User can trigger the IP Camera for the Snapshot operation in the
THEN/ELSE Action statement; the editing page for Snapshot Action
is shown as follow:
Follow the steps below:
i
ii If the IP Camera supports OSD message function and user has
iii Click "OK" button to confirm the settings and return to the
10.2.3.2
User can trigger the IP Camera for the Video Recording operation in
the THEN/ELSE Action statement; the editing page for Video Action
is shown as follow:
http://wise.icpdas.com
Snapshot
Figure 10-40：IP Camera's Snapshot action setting page
Specify the IP Camera from the dropdown list of the "IP
Camera & Snapshot" section. If the WISE's action is executed,
the WISE will trigger the IP Camera to capture a snapshot and
save it.
completed the setting, then a pre-set OSD message could be
selected from the dropdown list of the "OSD message" field.
The snapshot which the IP Camera captures will bind the OSD
message and save it.
Rule settings page.
Video
231