Figure 10-52：Mqtt Broker Function Action Setting Page; Figure 10-53：Mqtt Publish Message Action Setting Page - ICP DAS USA WISE-2841M Series User Manual

ICP DAS WISE User Manual
shown as follow:
Follow the steps below:
i Select the specific Broker from the dropdown list of the
ii Specify the Broker Function status to be "Disable" or "Enable"
iii Click "OK" button to confirm the settings and return to the Rule
10.2.7.2
You can publish a MQTT Topic to the Broker when executing a
THEN/ELSE Action statement; the editing page is shown as below:
Follow the steps below:
i Select a pre-set MQTT Publish Topic message from the
ii Click "OK" button to confirm the settings and return to the Rule
http://wise.icpdas.com
Figure 10-52：MQTT Broker Function action setting page
"Broker" field.
from the dropdown list of the "Status" field. When the Action
being executed, the Broker Function status will be changed to
specified status.
settings page.
Publish Message
Figure 10-53：MQTT Publish Message action setting page
dropdown list of the "Broker" and "Message" fields. The
MQTT Publish Topic message will be displayed for you to
verify if this is the MQTT Publish Topic message you are going
to send to.
238