Table of Contents
Advertisement
ICP DAS WISE User Manual
Follow the steps below to set up Time Synchronization Setting:
i In the "Function Status" field, click "Enable" to enable the Time
Synchronization function.
ii In the "SNTP Time Server" field, input the IP address or domain name
of the SNTP Time Server. There are default SNTP Time servers, the
user could modify the address to use other servers. Click "Use Default
SNTP Time Servers" to restore the default Time Server settings.
iii The default Port number setting is "123", currently it is not allowed to
be modified.
iv User can select the time zone of the WISE‟s location from the
dropdown list in the "Time Zone" field.
v After all settings are completed, click "Save" button to save the
changes.
Please Note: After enable the Time Synchronization function, user cannot
manually set up the current time of WISE.
5.2 Network Setting
Network Setting allows making a change to LAN network configuration
and the priority order of the network interface on the WISE. The following
figure illustrates the configuration interface:
http://wise.icpdas.com
37
Advertisement
Table of Contents
