ICP DAS USA WISE-2841M Series User Manual page 274

ICP DAS WISE User Manual
11. Power off the WISE, remove the MicroSD card for the OS recovery
operation, insert the original MicroSD card back, set the Rotary Switch to
position 0 and power on again to complete the procedure of "Reinstall OS
and firmware".
 Rotary Switch=8 ： Send the passwords to the Email account of the
Administrator
1. Switch the Rotary Switch to position 8.
2. Connect to WISE Login webpage via Web browser. Now a "Forget
password" message will be displayed under the password field. Click the
"Forget password" message, then the system will send an email with the
passwords (administrator account, user account, guest account, Local FTP
login and CGI Query Authentication) to the Email account of the
administrator that was previously set by the user in
section.
The following figure illustrate an example of the Email the WISE sends to
the Email account of the Administrator. The Email content will include the
following information.
Administrator password is "Admin".
User1 password is "User1".
User2 password is "User2".
User3 password is "User3".
User4 password is "User4".
http://wise.icpdas.com
"5.3 Account
Setting"
274