Figure 10-29：Schedule Condition Setting Page; Figure 10-30：Sd Card Status Condition Setting Page - ICP DAS USA WISE-2841M Series User Manual

ICP DAS WISE User Manual
Follow the steps below:
i Select the Schedule that you are going to use for IF condition
statement from the dropdown list of "Schedule" field.
ii Define the evaluation criteria of the schedule status in IF statement to
be "In Range" or "Out of Range". If the schedule status match the
evaluation criteria, the result of this condition evaluation will be
"true".
iii Click "OK" button to confirm the settings and return to the Rule
settings page.
10.1.12 SD Card Status
The status of SD Card can be used as evaluation criteria for IF condition
statement; the editing page for SD Card Status Condition Setting is shown
as follow:
Follow the steps below:
i When the status of micro SD Card appears abnormal (micro SD Card
is not detected or the space is less than 100MB), the result of this
condition evaluation will be "true".
ii Click "OK" button to confirm the settings and return to the Rule
settings page.
10.1.13 Internal Register
Internal Register value can be used as evaluation criteria for IF condition
statement; the editing page for Internal Register Condition Setting is shown
http://wise.icpdas.com
Figure 10-29：Schedule condition setting page
Figure 10-30：SD Card Status condition setting page
219