Figure 10-43：Aws Function Status Action Setting Page; Figure 10-44：Aws Publish Message Action Setting Page - ICP DAS USA WISE-2841M Series User Manual

ICP DAS WISE User Manual
ii Click "OK" button to confirm the settings and return to the
10.2.4 Amazon Web Services
Click on "Amazon Web Services", 3 options will appear as the following:
"Function Status", "Publish Message" and "Reset Variable".
10.2.4.1
User can execute an action to change the connection operation
between Amazon Web Services(AWS) and WISE in the THEN/ELSE
Action statement; the editing page is shown as follow:
Follow the steps below:
i
ii Click "OK" button to confirm the settings and return to the
10.2.4.2
You can publish messages to AWS when executing a THEN/ELSE
Action statement; the editing page is shown as below:
http://wise.icpdas.com
lists of the "IP Camera" and "OSD message" sections. If the
WISE's action is executed, the WISE will trigger the IP
Camera to show the content of the selected OSD message.
Rule settings page.
Function Status
Figure 10-43：AWS Function Status action setting page
Specify the connection operation between AWS and WISE to
be "Disable" or "Enable" from the dropdown list of the
"Status" field.
Rule settings page.
Publish Message
Figure 10-44：AWS Publish Message action setting page
233