Figure 10-66：Delay Action Setting Page - ICP DAS USA WISE-2841M Series User Manual

ICP DAS WISE User Manual
Follow the steps below:
i Specify the Rule (It has to be a previously saved Rule) that is going to
be changed in the Action Condition statement from the dropdown list
of the "Rule" field.
ii Specify the Rule status to be "Disable" or "Enable" from the
dropdown list of the "Action" field. When the Action being executed,
the Rule status will be changed to specified status.
iii Click "OK" button to confirm the settings and return to the Rule
settings page.
10.2.18 Delay
Users can add the Delay action to define the delay time before the execution
of next actions. The editing page for Delay Action Setting is shown as
below:
Follow the steps below:
i In the "Action" field, set the delay time (unit: second) before the
execution of next actions. The counting of the delay time would start
when the previous action starts, rather than when the previous action
is done.
ii Specify the "Execution Frequency" to be "One Time" or "Repeat".
Please refer to
iii Click "OK" button to confirm the settings and return to the Rule
settings page.
http://wise.icpdas.com
Figure 10-66：Delay action setting page
"10.2 THEN/ELSE Action
Setting" for detail.
246