Account Setting; Figure 5-5：Account Setting Page For Administrator - ICP DAS USA WISE-2841M Series User Manual

ICP DAS WISE User Manual
Please note: If the connection mode is "Specify an IP address", then you
make modification to the IP address, the system will logout automatically
and re-connect to the web page automatically based on the new setting. If
the connection mode is "Obtain an IP address automatically (DHCP)", the
system may fail to re-connect to the web page because the IP address is
changed. Please use
address of WISE, and then launch browser to connect to the WISE with the
new IP address.
5.3

Account Setting

WISE provides three levels of authority account as 1 Administrator account,
5 User accounts and 1 Guest account. The administrator account need to set
up its password when the administrator login WISE for the first time. About
the User account, it must be enabled by the administrator and need the
administrator to assign its login password. The default login password for
Guest account is "Guest". All login accounts of WISE can modify its
password in the
to 16 characters. About the "Idle Time" setting, all login accounts of WISE
can set
administrator/User/Guest account login the WISE page, and the idle time
exceeds the pre-set time interval, the login account will be automatically
logged out. After all settings are completed, click "Save" button to save the
changes. Following is the interface for the setting of the Administrator
account.
Administrator can set up the Email address in the "Administrator Profile
Setting" section. After complete the setting, WISE will send the alarm email
http://wise.icpdas.com
WISE-284x Utility
"Account
Setting" page, and the password length is limited
"Idle
up the
Figure 5-5：Account Setting Page for Administrator
to search the WISE, get the new IP
Time" independently. It mean the
39