Figure 6-38：Discrete Input Setting Example For Modbus Rtu Module - ICP DAS USA WISE-2841M Series User Manual

ICP DAS WISE User Manual
the local Modbus address of WISE to keep the Discrete Input data.).
Figure 6-38 shows an example about Discrete Input setting for a
Modbus RTU module. The starting Modbus address of the Discrete
Input block is
Discrete Input data in the setting. So that the WISE can access the
10020, 10021, 10022, 10023, 10024, and 10025 Discrete Input
address of the module, and these retrieved Discrete Input data will
be kept in WISE Modbus Address 14500、14501、14502、14503、
14504 and 14505.
Figure 6-38：Discrete Input Setting Example for Modbus RTU module
 To modify the starting address or quantity setting, please click on
the setting block and input the setting. Click "OK" for modification
or click "Remove" to remove the setting.
 If the user wants to assign a Nickname for the address blocks, the
user can click on the "Nickname Setting" tab, and then input the
Nickname for each address block. The Nickname will be shown in
the "Channel Status" and "Rule Setting" pages.
http://wise.icpdas.com
10020(10000 + 20), it requires to set 6 continuous
84