Figure 6-34：Icp Das Modbus Rtu Module Ao Channel Setting Page - ICP DAS USA WISE-2841M Series User Manual

ICP DAS WISE User Manual
 Type: Select the input signal type of the AI channel from the
 Scale: Please refer to
After all settings of the AI channels are completed, continue the
configuration of other channels, and after all channel settings are
completed, click "OK" button to save the changes and return to
Modbus RTU Module List.
6.5.4 The AO channel setting for ICP DAS module
The ICP DAS Modbus RTU module AO channel setting interface is
shown as below (using M-7024 as an example):
Figure 6-34：ICP DAS Modbus RTU module AO Channel Setting page
The settings are as below:
 Nickname: For user to define nickname for the module and the
 Type: Select the output signal type of the AO channel from the
http://wise.icpdas.com
temperature units can be set as degree Celsius or degree
Fahrenheit.
dropdown list.
module" section for detail.
DCON
I/O channels, these nicknames will be displayed on the "Channel
Status" and "Rule Setting" pages.
dropdown list.
"6.3.3 The AI channel setting for I-7000/DL
79