Table of Contents
Advertisement
ICP DAS WISE User Manual
iii Select the version used by this SNMP Agent in the "Version" field.
Different versions will require different information to be entered. V2c
needs to enter the information for "Trap Community" field. For V3,
user need to enter the information for "Username" field and select the
"Security Level", and then set up the information for "Authentication
Protocol", "Authentication Password", "Encryption Protocol" and
"Encryption Password" according to the selected security level.
iv Click the "Send" button in "SNMP Trap Setting Test" field to
immediately send a test SNMP Trap to the SNMP Agent address user
enter to check whether the SNMP Trap setting is correct, or not.
v Click "+ Add new trap message" to add the new SNMP trap message
for the SNMP Agent.
http://wise.icpdas.com
Figure 9-16：SNMP Agent Setting Page of V2c version
Figure 9-17：SNMP Agent Setting Page of V3 version
165
Advertisement
Table of Contents
