Figure 9-28：Cgi Command (Receiving) Setting Page (1) - ICP DAS USA WISE-2841M Series User Manual

ICP DAS WISE User Manual
in the "Save content into the file" filed to enable WISE to save the
content of the reply of the CGI command into a file. The file can
be sent as the attached file by the WISE Email function.
After complete all settings, click the "OK" button to confirm the
xix
CGI Command setting, and return to the CGI Server Setting page.
xx
Repeat steps xii~ xvii to complete settings of all CGI Commands.
xxi To modify the settings of a pre-set CGI Command, please click on
the radio button in front of the CGI Command, and then click on
"Setting" to modify the settings.
xxii To copy the settings of a pre-set CGI Command to the new CGI
Command, please click the radio button in front of the pre-set CGI
Command and then click "Copy", a new CGI Command will be
added to the list and the settings of the old CGI Command will be
copied to this newly added CGI Command.
xxiii To remove a pre-set CGI Command, please click the radio button
in front of the pre-set CGI Command and then click "Remove".
xxiv After you finish all the CGI Command settings, click "OK" button
to confirm the settings, and return to CGI Server List page.
xxv Repeat steps i~ xxii to complete settings of all CGI Servers.
xxvi After you finish all the CGI Server settings, click "Save" button to
save the settings.
9.6.2 The setting of CGI command receiving
WISE supports the CGI command receiving function. This function
allows WISE to receive the CGI command from other network devices.
The content of CGI command can be used in IF condition statements to
trigger the THEN/ELSE actions. The configuration page for CGI
command receiving setting is shown as below:
http://wise.icpdas.com
Figure 9-28：CGI Command Setting page (1)
(Receiving)
174