Figure 5-19：Snmp V3 User Setting Page; Figure 5-20：Snmp V3 User Authentication & Encryption Setting Page - ICP DAS USA WISE-2841M Series User Manual

ICP DAS WISE User Manual
vii. Press the "+Add new user" button to enter the SNMP User Setting page.
The setting interface is as follows:
viii. Key in the username in the "User Name" field.
ix.
Select "read-only" or "read-write" in the "Action Permission" field.
x. There are three levels of security options in the "Security Level" field,
please refer to following.

noAuthNoPriv: Communication without authentication and
encryption.

authNoPriv: Communication shall be authenticated but not
encrypted. The authentication protocol must be "SHA" or "MD5",
and set the authentication password.

authPriv: Communication shall be authenticated and encrypted.
The settings of authentication protocol must be "SHA" or "MD5".
The settings of encryption must be "AES" or "DES", and set the
password for each field. Please refer to following.
Figure 5-20：SNMP V3 User Authentication & Encryption Setting Page
http://wise.icpdas.com
Figure 5-19：SNMP V3 User Setting Page
48