Table of Contents
Advertisement
ICP DAS WISE User Manual
let WISE send the data of I/O Data Table too frequently.
v In the "Start Address" field, set up the start address which the
receiver (SCADA software) will use to save the data of I/O Data
Table from WISE.
vi After you finish the "Active I/O sending" settings, click "Save"
button to save the settings.
9.9 Channel Status Setting
Channel Status function offers all WISE login account an easy way to view
monitoring page that allows users to view important controller information
(Internal Register value, I/O module list and I/O channel value) in real time
without SCADA software. In addition, the Administrator login account can
update the value of Internal Register or I/O output channel (DO/AO/Coil
Output/Holding Register) by the interface WISE provide.
In order to let users browse the I/O channel value in a flexible and efficient
way, WISE provide two I/O value display interfaces as below.
Default Channel Status page: It displays all I/O channel status based
on the sorting of all I/O Module (Default style).
User-defined Channel Status page: It displays the I/O channel status
based on the user-defined arrangement.
The settings steps for User-defined Channel Status page are as below:
Click on "Add new Channel Status page" to add the new Channel
i
Status page which will be used to display the I/O channel data.
After clicking the "Add new Channel Status page", the Channel Status
ii
setting page will appear. In the Channel Status setting page, please input
the name of the page in the "Nickname" field and you could also input
the description of this page in the "Description" field. The setting page
interface will be shown as below:
http://wise.icpdas.com
Figure 9-46：Channel Status List Page
188
Advertisement
Table of Contents
