Figure 10-49：Ibm Bluemix Function Status Action Setting Page; Figure 10-50：Ibm Bluemix Publish Message Action Setting Page - ICP DAS USA WISE-2841M Series User Manual

ICP DAS WISE User Manual
Follow the steps below:
i
ii Click "OK" button to confirm the settings and return to the Rule
10.2.6 IBM Bluemix
Click on "IBM Bluemix", 3 options will appear as the following: "Function
Status", "Publish Message" and "Reset Variable".
10.2.6.1
User can execute an action to change the connection operation
between IBM Bluemix and WISE in the THEN/ELSE Action
statement; the editing page is shown as follow:
Figure 10-49：IBM Bluemix Function Status action setting page
Follow the steps below:
i
ii Click "OK" button to confirm the settings and return to the
10.2.6.2
You can publish messages to IBM Bluemix when executing a
THEN/ELSE Action statement; the editing page is shown as below:
Figure 10-50：IBM Bluemix Publish Message action setting page
http://wise.icpdas.com
Select a pre-set Subscribe variable from the dropdown list of
the "Variable Name" field. When this action is executed, WISE
would reset the content of the variable, and the evaluation
result of the IF statement which is associated with the variable
will be verified again.
settings page.
Function Status
Specify the connection operation between IBM Bluemix and
WISE to be "Disable" or "Enable" from the dropdown list of
the "Status" field.
Rule settings page.
Publish Message
236