Table of Contents
Advertisement
ICP DAS WISE User Manual
arrangement order for each Modbus TCP module in the list. Please refer to
the description of "6.3 I-7000/DL DCON Module List Operation Interface"
for detail.
After all settings are completed, click "Save" button to save the changes.
About the setting of the I/O channel of ICP DAS (P)ET-7000/
WISE-7100/WF-2000/IR/DL modules and Modbus TCP modules, please
input the value for the IP, Port and NetID parameters for the Modbus TCP
protocol first. Because others parameter are the same as the Modbus RTU
device setting, so please refer to "6.5.1 The DI channel setting for ICP DAS
module" ~ "6.5.8 The Holding Register Setting of Modbus RTU Module"
sections for detail.
WISE does not provide the signal type setting interface for the AI/AO
channels of (P)ET-7000/WISE-7100/WF-2000/IR/DL modules. Please use
the proprietary interface of (P)ET-7000/WISE-7100/WF-2000/IR/DL
modules for the setting.
6.8 IP Camera Setting
WISE allows connections to ICP DAS iCAM IP Camera series. The IP
Camera Setting page allows users to add IP Cameras that are connected to
the WISE to the list. After the module is added, the user can set up the
configuration of the IP Camera. The list of supported iCAM IP cameras and
the detail functions are as below:
Camera Model
Default login
account/password
Record video
length
I/O channel
OSD message
setting function
Supported Event
Type
http://wise.icpdas.com
iCAM-ZMR8422X
iCAM-MR6422X
iCAM-MR6322
admin / pass
10~60 seconds (configurable)
No
English, Chinese
Motion Detection
Tampering Detection
95
Advertisement
Table of Contents
