I/O Module Data Logger Setting; Figure 7-1：I/O Module Data Logger Setting Page - ICP DAS USA WISE-2841M Series User Manual

ICP DAS WISE User Manual

7.1 I/O Module Data Logger Setting

The I/O Module Data Logger provides users to quickly record the data of all
I/O modules and Internal Registers of WISE.
Logger Setting page, the user could enable the Data Logger if required. The
setting page is shown as below:
Follow the steps below:
i. Check "Enable" in the "Function Status" field to enable the
Data Logger
ii. In the "Folder Name" field, input the name of the file folder for the
data logger files.
iii. Select "Log Interval" to enable period recording function in WISE.
When the time reaches the period time interval, all I/O data will be
recorded once. The data recording will keep going periodically. There
are ten options: 5 secs, 10 secs, 30 secs, 1 min, 2 mins, 3 mins, 5 mins,
10 min, 20 min, 30 min and 1 hour.
iv. In the "Time Format" field, define the time format of the content of the
log file from the dropdown list, "yyyy" indicates western year, "MM"
indicates month, "dd" indicates date, "hh" indicates hour, "mm"
indicates minute and "ss" indicates second. User can insert comma („,‟)
flexibly in the "Time Format" field to define the time format of the
data log file, and let it be suitable for your database system.
v. The Data Log file is in CSV format. In the data log file, current date,
time and data log type (Period recording or Event trigger recording)
will also be automatically pasted to each data log item. The final data
http://wise.icpdas.com
Figure 7-1：I/O Module Data Logger Setting Page
function.
On the I/O Module Data
I/O Module
105