Figure 10-32：Rule Status Condition Setting Page; Figure 10-33：Ping Condition Setting Page - ICP DAS USA WISE-2841M Series User Manual

ICP DAS WISE User Manual
Follow the steps below:
i Specify the Rule that is going to be used in the IF Condition
statement from the dropdown list of the "Rule" field.
ii Specify the Rule status to be "Disable" or "Enable" from the
dropdown list of the "Status" field. When the Rule status matches the
specified status, the evaluation result will be "true".
iii Click "OK" button to confirm the settings and return to the Rule
settings page.
10.1.15 Ping
The Ping Status can be used as evaluation criteria for IF condition statement.
The editing page for Ping Condition Setting is shown as below:
Follow the steps below:
i Specify the Ping that is going to be used in the IF Condition statement
from the dropdown list of the "Ping" field. When the Ping status was
failure, the evaluation result will be "true".
ii Click "OK" button to confirm the settings and return to the Rule
settings page.
http://wise.icpdas.com
Figure 10-32：Rule Status condition setting page
Figure 10-33：Ping condition setting page
221