Table of Contents
Advertisement
ICP DAS WISE User Manual
5. If the L2 indicator is ON, it means the firmware installation is in progress.
6. After waiting for a few minutes, if the installation is successful, L1, L2, and
L3 indicators will flash at the same time; if the installation fails, only L1
indicator will flash.
7. Turn the Rotary Switch of WISE to position 0 (Normal).
8. Power off and power on WISE again to complete the firmware update
procedure.
Rotary Switch=7：Reinstall OS and firmware via MicroSD
1. Power off WISE.
2. Go to WISE official website (http://wise.icpdas.com) to download the
WISE-2841M OS Recovery Kit: WISE-2841M_OS_recovery.zip.
3. Prepare a MicroSD card with a capacity greater than 8GB, insert the card
directly into the computer or connect to the computer via card reader.
4. Uncompress
HDDRawCopy1.10Portable.exe.
5. Select the source which will be burned to WISE from the interface, click the
OS image file in the OS Recovery Kit: WISE-2841M_vX.X.X.imgc, and
press the "Continue" button after selection.
http://wise.icpdas.com
the
file
of
OS
Recovery
Kit
and
execute
272
Advertisement
Table of Contents
