Figure 6-17：I-7000/Dl Module Di Channel Setting Page - ICP DAS USA WISE-2841M Series User Manual

ICP DAS WISE User Manual
module to upper order (decrease the index number (No.)).
 Move Down: Click the radio button in front of the I-7000/DL DCON
module and click on "Move Down" to move the I-7000/DL DCON
module to lower order (increase the index number (No.))
 Copy: To copy the settings of a pre-set I-7000/DL DCON module to
the new I-7000/DL DCON module, please click the radio button in
front of the pre-set I-7000/DL DCON module and then click on
"Copy", a new I-7000/DL DCON module (in sequence) will be added
to the list and the settings of the old I-7000/DL DCON module will be
copied to this newly added I-7000/DL DCON module.
 Remove: Click the radio button in front of the I-7000/DL DCON
module and click on "Remove" to remove the selected I-7000/DL
DCON module.
After all settings are completed, click "Save" button to save the changes.
Following will describe the setting of the I/O channel of I-7000/DL DCON
modules.
6.3.1 The DI channel setting for I-7000/DL DCON module
The I-7000/DL DCON module DI channel setting interface is shown as
below (using I-7060 as an example)
http://wise.icpdas.com
Figure 6-17：I-7000/DL Module DI Channel Setting page
66