Table of Contents
Advertisement
ICP DAS WISE User Manual
Please follow the steps below for the VPN settings:
i. In the "Function Status" field, check "Enable" to enable the VPN
function.
ii. In the "Server Settings" section, select the VPN service user want to use
from the 4 connection types, then complete the setting for the
connection and TCP/IP required by the service.
iii. In the "Connection Setting" section, check "Enable" in the
"Automatically connect after power on" field to automatically connect
to the VPN after the WISE controller is powered on.
iv. User can click the "Testing" button in the "Connection Testing" field to
confirm whether the VPN connection setting is correct, or not.
v. After completing the settings, click the "Save" button to save the
settings.
http://wise.icpdas.com
Figure 5-21：VPN Setting Page
50
Advertisement
Table of Contents
