ICP DAS WISE User Manual
The settings steps are as below:
Click the "CGI Sending" Tab on the right-top corner of the CGI
i
command Setting page.
Click on "Add new CGI Servers" to add the new CGI servers
ii
which will receive the CGI commands.
After clicking the "Add new CGI Servers", the CGI Server Setting
iii
Page will appear. The setting page interface will be shown as
below:
iv
In the CGI Server Setting Page, you can input the name of the
remote CGI Server in the "Nickname" field and you could also
input the description of this CGI Server in the "Description" field.
v
Enter the remote CGI Server IP address (or domain name) and Port
http://wise.icpdas.com
Figure 9-24:CGI Command Server List Page
Figure 9-25:CGI Command Server Setting page
171