Table of Contents
Advertisement
ICP DAS WISE User Manual
8.6 IoTstar Real-Time Data Sending Setting
IoTstar can receive the real-time I/O data uploaded by WISE, and import
the data into the database it created. The setting page is shown as below:
Figure 8-31：IoTstar Real-Time Data Sending Setting page
Follow the steps below:
In the "Function Status" field, check "Enable" to enable the Real-Time
i
I/O data upload operation.
ii In the "Add Channel" section, select the "Interface", "Module" and
"Channel" from the dropdown list and click "Insert" to add the I/O
channel into the "Channel List" section. User can select "All" in
"Channel" field to insert all I/O channels of the module at once.
iii WISE will actively send the Real-Time I/O channel data which is
located in the "Channel List" section to IoTstar. User can modify the
database field name of the I/O channel data in the "*Name" field. To
remove a pre-set I/O channel, please click the radio button in front of
the pre-set I/O channel and then click "Remove" button.
Please Note:
The name inputted in the "*Name" field must be a unique name.
The name set in the "*Name" field will be saved in the "Name" field of
http://wise.icpdas.com
146
Advertisement
Table of Contents
