Figure 10-13：Discrete Input Condition Setting Page; Figure 10-14：Coil Output Condition Setting Page - ICP DAS USA WISE-2841M Series User Manual

ICP DAS WISE User Manual
Follow the steps below:
i Specify the module and the address of the Modbus TCP/RTU
ii Define the evaluation criteria of the status in IF statement to be
iii Click "OK" button to confirm the settings and return to the Rule
10.1.2.2
Coil Output value from Modbus TCP/RTU Slave module can be
included in the IF condition statements; the editing page for Coil
Output Condition Setting is shown as below:
Follow the steps below:
i Specify the module and the address of the Modbus TCP/RTU
http://wise.icpdas.com
Figure 10-13：Discrete Input condition setting page
Slave module from the dropdown list of the "Module &
Address" section that you are going to include its value in the
IF condition statements.
"OFF", "ON", "ON to OFF", "OFF to ON" or "Change". Once
the Discrete Input value matches the evaluation criteria, the
result of this condition evaluation will be "true".
the statement involves state transitions: "ON to OFF", "OFF to
ON" and "Change", the action will be executed only once and
only at the moment when the state transition occurs.
settings page.
Coil Output
Figure 10-14：Coil Output condition setting page
Slave module from the dropdown list of the "Module &
Address" section that you are going to include its value in the
IF condition statements.
Please note: If
208