Figure 10-65：Rule Status Action Setting Page - ICP DAS USA WISE-2841M Series User Manual

ICP DAS WISE User Manual
Internal Register is from the Host controller (WISE). The "Remote"
in the "Source" field mean the Internal Register is from the remote
WISE-71xx controller.
has to be enabled in Advanced Setting.
ii Specify the Operator in the "Operator" field. The 6 operators are as
follow:
 "="：Indicate assign the new Internal Register value as the
 "+="：Indicate assign the new Internal Register value as the
 "-="：Indicate assign the new Internal Register value as the
 "*="：Indicate assign the new Internal Register value as the
 "/="：Indicate assign the new Internal Register value as the
 "%="：Indicate assign the new Internal Register value as the
iii Set up the value in the "Value" field, WISE provides 12 value options.
Please refer to
iv Specify the "Execution Frequency" to be "One Time" or "Repeat".
Please refer to
v Click "OK" button to confirm the settings and return to the Rule
settings page.
10.2.17
The Rule Status can be modified to be Disable or Enable in the Action. The
editing page for Rule Status Action Setting is shown as below:
http://wise.icpdas.com
Please note: the Internal Register you select
value in "Value" field.
original Internal Register value plus the value in "Value" field.
original Internal Register value minus the value in "Value"
field.
original Internal Register value times the value in "Value" field.
original Internal Register value is divided by the value in
"Value" field.
original Internal Register value divide the value in "Value" field
and return the remainder.
"10.2.1.3 AO" section for detail.
"10.2 THEN/ELSE Action
Rule Status
Figure 10-65：Rule Status action setting page
Setting" for detail.
245