Table of Contents
Advertisement
2.6 Installing GT-530
If users want to start GT-530 normally, it needs to follow these steps to install the
GT-530 below:
A.
Install the antenna
B.
Plug in the normal SIM card (Before apply the SIM card, confirm it is OK
by mobile phone.)
C.
Pin08 and Pin09 connect to the DC.+VS and DC.GND of the power supply.
D.
Follow the section 2.3 to wire the I/O connection.
E.
If you want to use the backup power, please connect the Li-battery to
GT-530.
F.
It is needed to wait for 30 ~ 50 seconds to search the GSM base and register
to the ISP. After finishing the process, GT-530 would be in normal
operation mode and the STA LED would blank per 3 sec. The start time of
GT-530 depends on the strength of signal.
2.7 How to reset GT-530
2.7.1
The Li-Battery is applied：
(1)
Remove Li-Battery from GT-530.
(2)
Turn off the external power and confirm the EXT LED is off.
(3)
Turn on the external power.
(4)
Re-install the Li-Battery.
2.7.2
The Li-Battery is not applied
(1)
Turn off the external power and confirm the EXT LED is off.
(2)
Turn on the power.
GT-530 User Manual, Version 1.0, August 2009
GT-530 user manual v1.0
11/48
Advertisement
Table of Contents
