Example 2: Sending The Variable Alarm Sms - ICP DAS USA SMS-531 User Manual

5.2 Example 2: Sending the variable alarm SMS

This example explains the procedure of the sending variable alarm SMS to the
defined phones. The alarm SMS includes the content defined in "Alarm Messages"
(max 54 chars) and the content (max 16 chars) by Modbus command.
1. Setting the parameters by the GT-531 Series Utility
(1) New and name an "Example2.prj" project in the Utility.
(2) Set the Modbus address as 1 (the factory default address is 1) and "Variable SMS"
as enable.
(3) Add 2 new phone groups and input phone numbers as follows:
SMS-531 User's Manual v1.1
- 37/60 -