Table of Contents
Advertisement
ICP DAS WISE User Manual
Please note: The following parameters has to be accurate to connect with WISE
properly:
Baudrate: the Baudrate has to be set the same as the Baudrate of WISE
COM Port which the module will connect. All I/O modules‟ Baudrate have
to be set the same as well.
Data format: set to be "Engineering" format.
Parity: the Parity has to be set the same as the Parity of WISE COM Port
which the module will connect. All I/O modules‟ Parity has to be set the
same as well.
For more detailed information, please refer to DCON Utility manual as below.
https://www.icpdas.com/tw/download/index.php?kind1=62&kind2=63&kw
=DCON+Utility+Pro
3. For others ICP DAS I/O module, please refer to related user manual for the
configuration setting. In order to accurately connect with WISE, please make sure
of the COM port setting (Module address (1~128), Baudrate, Parity) or Ethernet
setting (IP address, Connection Port (1~65535), NetID (1~247)). Please follow the
links as below for the user manual of the related ICP DAS I/O modules.
Go to the "Download Center" page of ICP DAS offical website, select
"About Product" in the "File Category1" field, select "User Manual" in the
"File Category2" field, and enter the desired information in the
"Product/Model" or "Keyword" field, then click the "Search" button to
http://wise.icpdas.com
279
Advertisement
Table of Contents
