Reset To Default; Dimensions - ICP DAS USA ALM-04-MRTU User Manual

ALM-04-MRTU User's Manual

2.2 Reset to default

Press & hold the reset button on the bottom side over 6 Sec until the Red LED quick
flash and release, the ALM-04-MRTU will restore to default setting, default Device ID is
"1", RS-485 setting is "115200,N,8,1", Volume is "5".
Figure 2-4: Reset button locate in the bottom side of ALM-04-MRTU

2.3 Dimensions

The diagrams below provide the dimensions of the ALM-04-MRTU to use in
defining your enclosure specifications. All dimensions are in millimeters.
Figure 2-5: Dimension of the ALM-04-MRTU
ALM-04-MRTU
User's Manual (Rev1.0, Jan./2020) ------------- 10