Figure 10-39：Holding Register Action Setting Page - ICP DAS USA WISE-2841M Series User Manual

ICP DAS WISE User Manual
the THEN/ELSE Action statement; the editing page for Holding
Register Action is shown as follow:
Follow the steps below:
i
ii Specify the Operator in the "Operator" field. The 3 operators
iii Set up the value in the "Value" field, WISE provides 12 value
iv Specify the "Execution Frequency" to be "One Time" or
v Click "OK" button to confirm the settings and return to the
10.2.3 IP Camera
Click on IP Camera, 3 options will appear as the following: Snapshot,
Video and OSD Message.
http://wise.icpdas.com
Figure 10-39：Holding Register action setting page
Select the module and the address of the Holding Register
from the dropdown list of the "Module & Address" section.
are as follow：
 "="：Indicate assign the new Holding Register value as
the value in "Value" field.
 "+="：Indicate assign the new Holding Register value
as the original Holding Register value plus the value in
"Value" field.
 "-="：Indicate assign the new Holding Register value as
the original Holding Register value minus the value in
"Value" field.
options. Please refer to
"Repeat". Please refer to
for detail.
Rule settings page.
"10.2.1.3 AO" section for more detail.
"10.2 THEN/ELSE Action
Setting"
230