ICP DAS USA WISE-2841M Series User Manual page 270

ICP DAS WISE User Manual
 Rotary Switch=2：Do not execute the rule file currently.
1. Power off WISE.
2. Set up the Rotary Switch of WISE to position 2.
3. Connect the WISE to power and wait for the system to start up (the "Run"
LED starts flashing)
4. Enter the WISE login page, the WISE login page will be restored to the
same as user login WISE first time, and the administrator's password needs
to be set again as below:
5. Set up the Rotary Switch of WISE to position 0.
6. After complete the setting of a new password, the previous setting of WISE
will be cleared, and the user can reset it.
 Rotary Switch=5：Reinstall WISE firmware via MicroSD
1. Make sure the L1 indicator is ON. It means the firmware can be installed.
2. Take out the MicroSD card from the WISE's MicroSD slot, and connect to
computer via card reader
3. Copy the firmware file and WiseFirmwareRestore.setting file to the
\FirmwareRestore\ directory of the MicroSD card. The content of the
WiseFirmwareRestore.setting file is as follow:
http://wise.icpdas.com
270