Figure 10-17：Ip Camera's Event Condition Setting Page; Figure 10-18：Cgi Receiving Command Condition Setting Page - ICP DAS USA WISE-2841M Series User Manual

ICP DAS WISE User Manual
10.1.3 IP Camera
Event from IP Camera can be used as evaluation criteria for IF
condition statement; the setting page for Event Condition Setting is
shown as below:
Follow the steps below:
i
ii Click "OK" button to confirm the settings and return to the
10.1.4 CGI Command
The parameters (Variable & Source) of CGI Receiving Command can be
included in the IF condition statements; the editing page for CGI Command
variable and source condition setting is shown as below:
Figure 10-18：CGI Receiving Command condition setting page
Follow the steps below:
i Specify the CGI Command variable and CGI Command source from
the dropdown list of "Variable Name" field and "Source Address"
http://wise.icpdas.com
settings page.
Figure 10-17：IP Camera's Event condition setting page
Specify the IP Camera and the Event type from the dropdown
list of the "IP Camera & Event" section that you are going to
include its value in the IF condition statements. iCAM IP
Camera provides 2 Event options as Motion Detection and
Tampering Detection for settings. If the IP Camera's Event is
triggered and WISE receives the notification from IP Camera,
then the result of this condition evaluation will be "true".
Rule settings page.
211