ICP DAS WISE User Manual
Follow the steps below:
i
ii Click "OK" button to confirm the settings and return to the
10.2.5.2
You can publish messages to Microsoft Azure when executing a
THEN/ELSE Action statement; the editing page is shown as below:
Figure 10-47:Microsoft Azure Publish Message action setting page
Follow the steps below:
i
ii Click "OK" button to confirm the settings and return to the
10.2.5.3
You can reset the saved content of the subscribe variable from
Microsoft Azure when executing a THEN/ELSE Action statement;
the editing page is shown as below:
Figure 10-48:Microsoft Azure Reset Variable action setting page
http://wise.icpdas.com
Specify the connection operation between Microsoft Azure and
WISE to be "Disable" or "Enable" from the dropdown list of
the "Status" field.
Rule settings page.
Publish Message
Select a pre-set Publish message from the dropdown list of the
"Message" field. The Publish message will be displayed for
you to verify if this is the message you are going to send to.
Rule settings page.
Reset Variable
235