Table of Contents
Advertisement
ICP DAS WISE User Manual
WISE. The following figure illustrates the set up interface:
Please follow the steps below for the SNMP settings:
i. In the "Function Status" field, check "Enable" to enable SNMP server.
ii. In the "Contact" field, input the "Contact" string.
iii. In the "Location" field, input the "Location" string.
iv. In the "Version" field, select the SNMP version that you want to use.
Currently WISE supports SNMP V2c and V3 protocols,
v. If the user selects "V2c" in the "Version" field, he must set up the
string in the "Read Community" and "Write Community" fields. The
default setting of "Read Community" and "Write Community" field is
"public" and "private".
vi. If the user selects "V3" in the "Version" field, he must set up the
SNMP user list. The setting interface is as follows.
http://wise.icpdas.com
Figure 5-17：SNMP Setting Page
Figure 5-18：SNMP V3 Setting Page
47
Advertisement
Table of Contents
