Figure 10-12：Ao Condition Setting Page - ICP DAS USA WISE-2841M Series User Manual

ICP DAS WISE User Manual
shown as below:
Follow the steps below:
i
ii Set up the expression statement for this channel value. Select an
iii Specify the evaluation value. If this AO channel value match
iv In order to avoid signal oscillation that may result in instability
v Click "OK" button to confirm the settings and return to the Rule
10.1.2 Modbus Module
Click on "Modbus Module", 4 options will appear as the following:
Discrete Input, Coil Output, Input Register and Holding Register.
10.1.2.1
Discrete Input value from Modbus TCP/RTU Slave module can be
included in the IF condition statements; the editing page for Discrete
Input Condition Setting is shown as below:
http://wise.icpdas.com
Figure 10-12：AO condition setting page
Specify the module and the channel from the dropdown list of
the "Module & Channel" section that you are going to include
its value in the IF condition statements.
operator from "=", ">", "<", ">=" or "<=".
the evaluation criteria, the result of this condition evaluation
will be "true". WISE provides 12 values options; you can
compare them with the AO channel value for condition
evaluation. Please refer to
to the measurement of the AO channel value or system
operations, the user can set up a Deadband value for the AO
channel to reduce the oscillation effect to the channel value.
"10.1.1.5
Please refer to
settings page.
Discrete Input
"10.1.1.2 DI
Counter" for detail.
AI" for more detailed information.
207