Figure 6-47：Ip Camera Setting Page; Figure 6-48：Set Up The No, Ip Address And Port Of The Ip Cameras - ICP DAS USA WISE-2841M Series User Manual

ICP DAS WISE User Manual
The setting page is shown as below:
Please Note：One WISE-2841M controller allows connections to at most 12
IP Cameras.
6.8.1 Set Connection Network Interface and Video Function
i. Select LAN 1 or LAN2 to be the connection network interface to
connect with IP Cameras. The settings of the selected LAN port
have to be in the same netowrk area with IP cameras.
ii. To enable the video recording function of IP Camera, users have to
enable the local FTP server setting and disable TLS Encryption, and
then IP cameras can upload the videos to WISE. Please refer to
Section
6.8.2 Add iCAM IP Camera
The user could add the ICP DAS iCAM IP Cameras manually one by
one, the steps are as below:
i. No.: The number will be the order of the IP Cameras. The range is 1
to 12.
ii. "IP" & "Port": Input the IP address and Port of this IP Camera.
iii. Select the IP Camera's module name: For ICP DAS IP Cameras, the
user could select the model name from the dropdown list.
http://wise.icpdas.com
Figure 6-47：IP Camera Setting Page
"5.4 Security
Setting".
Figure 6-48：Set up the No, IP address and Port of the IP Cameras
96